Scottsdale Elite Pool Repair & Resurfacing: Trusted Pool Repair, Remodeling & Pebble Tec Resurfacing
Scottsdale Elite Pool Repair provides professional pool repair, pool resurfacing, pool plaster repair, pool replastering, PebbleTec repair, pool crack repair, pool tile repair, pool deck repair, pool equipment repair, and pool plumbing repair to restore damaged and aging residential pools. From cracked plaster and faded surfaces to leaking plumbing, broken equipment, and structural damage, we focus exclusively on repairing and resurfacing pools.
Our team serves homeowners throughout Scottsdale with solutions designed for Arizona's demanding desert climate. Whether your swimming pool needs a targeted plaster or PebbleTec repair, structural crack repair, tile or deck work, equipment or plumbing repairs, or a complete pool resurfacing and replastering, we provide clear recommendations and quality workmanship to help restore the appearance, performance, and long-term durability of your pool.
Get a FREE Quote
Pool Repair Services in Scottsdale, AZ
Pool Repair
We handle repairs for pumps, filters, heaters, and salt chlorine generators. Our technicians diagnose the root cause of equipment failure rather than replacing parts unnecessarily.
Common repair calls we receive include:
- Pool pumps that run loud or stop working
- Filters that no longer clean water effectively
- Heaters that fail to reach set temperatures
- Salt cell malfunctions
- Automation system errors
We inspect the entire system before recommending a fix. This approach helps us catch related problems, like a failing motor causing a pump to overheat, before they lead to bigger repairs.
Pool Plumbing Repair
Underground plumbing lines carry water between the pool, filter, and equipment. Breaks or blockages in these lines reduce circulation and can cause pressure imbalances throughout the system.
We repair plumbing issues including:
Broken Pipes - Ground shifting, tree roots (Common Cause)
Low Water Flow - Clogged lines, collapsed pipe (Common Cause)
Air in the System - Loose fittings, suction leaks (Common Cause:
Valve Failure - Wear, mineral buildup (Common Cause)
We locate the affected section of pipe, make the repair, and pressure test the line afterward to confirm the fix holds. This step verifies that water flows properly before we close up any excavation work.
Pool Leak Detection
Pool leak waste water and can undermine a pool's structure over time. We use pressure testing, dye testing, and electronic leak detection equipment to locate leaks in shells, plumbing lines, and equipment pads.
A pool losing more than 1/4 inch of water per day beyond normal evaporation typically indicates a leak. We check the following areas during an inspection:
- Skimmer and return lines
- Light niches and conduit
- Structural cracks in the shell
- Equipment seals and unions
Once we identify the leak's location, we provide a clear explanation of the cause and the repair options available.
Pool Crack Repair
Cracks form in pool shells due to ground movement, age, or improper installation. We repair both surface cracks and structural cracks using methods suited to the crack type and pool material.
Gunite and shotcrete pools may develop hairline cracks that affect only the plaster layer, while structural cracks extend into the shell itself. We assess crack depth and location before selecting a repair method, which may include:
- Epoxy injection for structural cracks
- Patching compounds for surface-level plaster cracks
- Rebar reinforcement in cases of significant structural movement
Left unaddressed, cracks can worsen and lead to water loss or further shell damage. We repair cracks promptly to limit that risk.
Pool Resurfacing & Replastering in Scottsdale
Pool Resurfacing
Most Scottsdale pools need resurfacing every 10 to 15 years, depending on the finish and maintenance history. We remove the old surface layer and apply a new finish that matches your budget and design preferences.
Signs that a pool needs resurfacing include:
- Rough or pitted texture on the pool floor and walls
- Visible cracks or chipping
- Discoloration that won't respond to chemical treatment
- Stains that persist despite cleaning
We work with several surface materials, including standard plaster, pebble finishes, and quartz aggregate. Each option has a different lifespan and price point, and we walk clients through the tradeoffs before starting any work.
Pool Replastering
Plaster is still one of the most common pool finishes in the Scottsdale area because of its lower upfront cost. Over time, plaster develops a rough texture and can stain more easily than other finishes.
Our replastering process includes:
- Draining the pool completely
- Removing the old plaster layer
- Repairing any structural cracks in the shell
- Applying new plaster in the client's chosen color
We use marcite and other standard plaster mixes that meet Pentair specifications. A freshly replastered pool typically lasts 7 to 10 years before it needs attention again, though water chemistry management plays a large role in how long the surface holds up.
Pool Plaster Repair - NEED FIX
Not every plaster issue requires a full replaster job. Small cracks, spot discoloration, and minor chipping can often be repaired directly without draining the entire pool.
We assess the extent of the damage before recommending a repair versus a replaster. If the plaster is failing in isolated spots but otherwise intact, a targeted repair saves money and downtime.
Common plaster problems we address:
Etching (Typical Cause) Low pH or improper chemical balance
Scaling (Typical Cause) High calcium hardness
Cracking (Typical Cause) Structural movement or age
Discoloration (Typical Cause) Metal staining or algae growth
We match repair patches to the existing plaster color as closely as possible.
Pebble Tec Resurfacing
Pebble Tec is a pebble-and-plaster composite finish known for its durability and slip resistance. It generally lasts longer than standard plaster, often 15 to 20 years with proper care.
We install Pebble Tec in a range of colors and pebble sizes, from fine to coarse aggregate. The finish gives the pool floor and walls a textured, natural look that also improves grip for swimmers.
Because Pebble Tec costs more upfront than plaster, we help clients weigh the extended lifespan against the initial investment. For pools with heavy year-round use, the added durability often justifies the price difference.
Pebble Tec Repair
Pebble Tec is more resistant to cracking and staining than plaster, but it isn't maintenance-free. Loose pebbles, small voids, or discoloration can develop over time, particularly in high-traffic areas like steps and benches.
We repair these sections by matching the existing pebble blend and color as closely as possible. This keeps the patch from standing out against the surrounding surface.
Routine inspection catches most Pebble Tec issues early, before they require a larger repair. We recommend checking the surface for loose or missing pebbles at least once a year, especially after heavy pool use during the summer months.
Pool Remodeling & Renovation
Pool Remodeling
We offer full pool remodeling services designed to update both the function and appearance of your pool. This includes shape changes, depth conversions, and the addition of features like baja shelves, waterfalls, or tanning ledges.
We also install upgraded equipment during remodels. Salt systems, energy-efficient pumps, and LED lighting are common additions that improve performance while reducing long-term costs.
Our team works with you to plan a remodel that fits your yard and your budget. We provide clear timelines and keep you informed at each stage of the project.
Pool Renovation
Pool renovation covers smaller-scale updates that refresh your pool without a complete redesign. This often includes resurfacing the pool basin, replacing worn plaster, or applying finishes like pebble or quartz aggregate.
We assess the current condition of your pool before recommending a renovation plan. Cracks, discoloration, and rough surfaces are common signs that renovation work is needed.
Our renovation process is built around minimizing downtime. We use efficient scheduling and proven techniques to get your pool back in use as quickly as possible, without compromising on quality.
Pool Coping Repair & Replacement
Coping forms the edge of your pool and plays a role in both safety and structural integrity. Cracked or uneven coping can create tripping hazards and allow water to seep behind the shell.
We repair minor coping damage when the material is still structurally sound. For more extensive wear, we replace coping entirely using materials such as concrete, travertine, or brick.
Matching new coping to your existing pool deck is part of our process. We take measurements and material samples to help maintain a consistent look across your outdoor space.
Pool Tile Replacement
Pool tile serves both a design and a functional purpose, marking the waterline and protecting the surface beneath it. Over time, tile can crack, loosen, or collect calcium buildup that is difficult to remove.
We replace damaged or outdated tile with materials suited to Arizona's climate and water conditions. Options include:
- Glass tile – resistant to fading and easy to clean
- Ceramic tile – widely available in various colors and patterns
- Stone tile – natural texture with a durable finish
We also address the substrate beneath the tile during replacement. This step helps prevent recurring issues with adhesion or shifting.
Pool Equipment Repair & Replacement
Pool Equipment Repair
We service all major brands and models of pool equipment, including pumps, filters, heaters, salt chlorinators, and control systems. Our technicians identify the root cause of a malfunction rather than just addressing symptoms.
Common issues we address include:
- Leaking or cracked equipment housings
- Electrical faults and wiring problems
- Worn seals, gaskets, and O-rings
- Corroded fittings and valves
- Unusual noises from motors or pumps
We provide a clear assessment before starting any work. If a repair isn't cost-effective compared to replacement, we tell you directly.
Pool Pump Repair
Pool pumps circulate water through the filtration and sanitation system, and a failing pump reduces water quality quickly. We repair issues such as motor burnout, bearing failure, impeller damage, and seal leaks.
Signs a pump needs attention include:
- Loud grinding or squealing noises
- Reduced water flow or pressure
- Visible leaks at the pump base
- Motor overheating or shutting off unexpectedly
We check the entire pump assembly, not just the motor, since a single faulty part can strain the whole system. When a pump is beyond repair, we install energy-efficient variable-speed replacements that lower long-term operating costs.
Pool Filter Repair
Filters remove debris and particles from pool water, and a damaged filter allows contaminants to recirculate. We work on all three common filter types: cartridge, sand, and D.E. (diatomaceous earth).
Filter TypeCommon Issues We RepairCartridgeTorn elements, cracked housings, pressure gauge failuresSandDamaged laterals, sand migration, valve malfunctionsD.E.Grid tears, backwash valve leaks, cracked manifolds
We also inspect pressure readings during service calls, since a consistently high or low reading often signals a developing problem. Replacing filter media or components at the right time prevents strain on the pump and heater.
Pool Heater Repair
A malfunctioning heater shortens the swim season and drives up energy costs if left unaddressed. We repair gas, electric, and heat pump systems, addressing problems such as ignition failures, faulty thermostats, and heat exchanger corrosion.
Typical heater problems include:
- Pilot light or ignition system failures
- Error codes on digital control panels
- Insufficient heating despite normal operation
- Gas supply or pressure issues
We test heaters under load to confirm consistent performance, not just that they power on. When a heater has reached the end of its service life, we discuss replacement options suited to pool size and usage patterns.
Pool Automation
Automation systems let pool owners control pumps, heaters, lighting, and chemical feeders from a single interface, often remotely. We repair and update these systems when controllers malfunction, sensors fail, or software becomes unresponsive.
We work with common automation issues such as:
- Unresponsive touchscreens or remote apps
- Sensor calibration errors affecting chemical readings
- Communication failures between components
- Outdated systems that no longer support current equipment
For pools without automation, we install systems that integrate with existing pumps and heaters. This gives owners direct control over scheduling and monitoring without manual adjustments at the equipment pad.
Pool Tile, Deck & Structural Repair
Pool Tile Cleaning
Calcium deposits, cracked grout, and loose tiles are common problems we see in pools throughout Scottsdale's hard water areas. Left untreated, calcium scale can spread across the waterline and become difficult to remove.
We use specialized cleaning methods to strip away buildup without damaging the tile surface. When tiles are cracked or missing, we match replacements as closely as possible to the original color and finish.
Our tile repair process includes:
- Calcium scale removal from the waterline and spillway areas
- Grout repair to prevent water infiltration behind the tile
- Tile replacement for cracked, chipped, or missing pieces
- Sealing to protect against future mineral buildup
Pool Deck Repair - need fix
Pool decks in the Scottsdale area face constant sun exposure and temperature swings, which lead to cracking, spalling, and surface degradation over time. We repair these issues before they become safety hazards or spread further into the concrete.
Cracks are filled and sealed to stop water penetration, which can worsen structural damage underneath. We also address uneven or sunken sections of the deck caused by soil shifting beneath the surface.
Common deck repair issues we handle:
Surface Cracks
Cause: Heat expansion and contraction
Repair Method: Crack filling and sealing
Spalling (Flaking)
Cause: Moisture and freeze-thaw cycles
Repair Method: Surface patching or resurfacing
Uneven Sections
Cause: Soil settling
Repair Method: Mudjacking or leveling
Pool Skimmer Repair
The skimmer plays a direct role in keeping the pool's water clean by removing debris before it sinks. A cracked or malfunctioning skimmer basket, lid, or housing reduces this efficiency and can lead to poor water circulation.
We inspect the skimmer housing for cracks, especially where it connects to the pool wall and plumbing. Weep holes are checked to confirm they're clear, since blockages here can cause water to back up.
Our skimmer repairs typically include:
- Replacing cracked or warped skimmer lids
- Repairing or replacing skimmer baskets
- Resealing the skimmer housing to the pool structure
- Clearing blocked weep holes for proper water flow
Pool Deck Resurfacing
When repairs alone won't restore a deck's appearance or structural integrity, resurfacing provides a longer-term solution. We apply a fresh layer of material over the existing concrete to renew both the look and durability of the surface.
Resurfacing also gives us the opportunity to update the deck's texture and color. Cool-touch coatings are a popular choice in Scottsdale, since they reduce surface heat during peak summer months.
Before resurfacing, we assess the deck for underlying cracks or drainage issues. Addressing these first ensures the new surface lasts and doesn't develop the same problems as before.
Pool & Spa Upgrades and Specialty Services
Spa Repair & Resurfacing
Spas experience more wear than pools due to higher water temperatures and constant jet pressure. We repair cracked shells, malfunctioning jets, and failing heating elements.
When resurfacing is needed, we apply the same Pebble Tec and plaster options available for pools, matched to your existing finish or updated to a new style. Common spa issues we address include:
- Cracked or peeling plaster
- Jet nozzles that have lost pressure or become clogged
- Heater malfunctions causing inconsistent water temperature
- Leaks around jet fittings or drain connections
We inspect the entire spa system before starting work to confirm the repair addresses the root cause, not just the surface symptom.
Pool Light Repair
Pool lights fail for a few common reasons: water intrusion into the fixture, burnt-out bulbs, or damaged wiring connections. We diagnose which of these applies before replacing any parts.
For older incandescent or halogen fixtures, we offer LED replacements that use less energy and last longer. Our technicians check the gasket seals during every light repair, since a failed seal is often what caused the original problem. We also test the connection at the junction box to rule out electrical issues beyond the fixture itself.
Repairs typically take place without draining the pool, since most fixtures are accessible from a niche built into the pool wall.
Pool Equipment Upgrades
Older pumps, filters, and heaters often cost more to run than newer, more efficient models. We assess your current equipment and identify where upgrades will lower utility costs or reduce maintenance frequency.
Variable-speed pumps, for example, use significantly less energy than single-speed models and allow more precise flow control. Cartridge filters require less maintenance than sand filters in many cases, though the right choice depends on your pool's size and usage.
We also install automated control systems that let you manage pumps, heaters, and lighting from a single interface. Our recommendations are based on your pool's specific setup, not a one-size-fits-all package.
Pool Acid Washing
Acid washing removes built-up algae stains, mineral deposits, and discoloration from plaster and pebble surfaces. This process uses a diluted acid solution applied directly to the drained pool surface, then rinsed away.
We recommend acid washing when a pool has visible staining that regular brushing and chemical treatment haven't resolved. It's not a routine maintenance task; most pools need it once every few years at most.
SituationAcid Wash Recommended?Light surface discolorationNo, try chemical treatment firstHeavy algae stainingYesMineral scale buildupYesFresh plaster (under 1 year)No
We evaluate surface condition before recommending this service to confirm it's the right approach.
Why We're the Best Pool Repair & Resurfacing Company in Scottsdale, AZ
What Does Our Pool Repair & Resurfacing Process Involve?
We start every project with a thorough inspection of your pool's surface, structure, and plumbing. This helps us identify cracks, delamination, or drainage issues before work begins.
Once we've assessed the pool, we drain it and prepare the surface. Preparation includes:
- Chip-out or bead-blasting the old surface
- Patching structural cracks with bonding agents
- Inspecting and repairing plumbing lines as needed
- Rebuilding tile lines or coping where damaged
After prep work, we apply the new surface material in even layers, then refill the pool and balance the water chemistry. We also test equipment like pumps and filters to confirm everything operates correctly before we consider the job complete.
Which Materials Do We Provide for Pool Repair & Resurfacing?
We offer several surface options depending on your budget and durability needs.
Plaster-Typical Lifespan: 7–10 years
Key Trait: Smooth, cost-effective finish
Pebble (Pebble Tec-style)
Typical Lifespan: 15–20 years
Key Trait: Textured, highly durable
Quartz-based finishes
Typical Lifespan: 10–15 years
Key Trait: Added color depth and strength
We also supply tile for waterline replacement, coping stone, and repair materials for plumbing and structural fixes. Each material is selected based on how it performs against Scottsdale's sun exposure and water chemistry demands, so your pool holds up over time rather than needing frequent touch-ups.
Pool Repair & Resurfacing Installation Timeline
We follow a structured process to keep projects on schedule:
- Initial inspection and assessment (Day 1) – we evaluate the pool's condition and identify necessary repairs
- Draining and surface prep (Day 1-2) – we drain the pool and remove the old surface material
- Repairs and patching (Day 2-3) – we address cracks, chips, or plumbing issues before resurfacing
- Surface application (Day 3-5) – we apply the new finish according to the selected material
- Curing period (Day 5-7) – the surface cures before refilling begins
- Refilling and water balancing (Day 7) – we refill the pool and balance chemical levels
We communicate at each stage so there are no surprises.
How Much Does Pool Repair and Resurfacing Cost?
Pool resurfacing in Scottsdale typically costs between $5,000 and $15,500, with the final price shaped by pool size, surface material, and current condition. Below we break down the pricing factors and give you a clearer picture of what to expect for your project.
1. Pool Repair & Resurfacing Pricing Guide
We base our pricing on a few core factors: the finish material you choose, the size of your pool, and how much prep or repair work is needed before resurfacing begins.
Scottsdale's climate plays a role too. With over 175 days above 90°F and hard water averaging around 300 mg/L, pool surfaces here wear down faster than in milder regions.
Our most common finish options include:
- Standard plaster – budget-friendly, shorter lifespan
- Pebble finishes – more durable, higher upfront cost
- Quartz and specialty aggregates – mid-range durability and appearance
We evaluate your pool's condition first, since existing cracks, delamination, or plumbing issues affect the total scope of work.
2. How Much Does Pool Repair & Resurfacing Cost?
For a standard residential pool holding 10,000 to 20,000 gallons, we typically see resurfacing costs fall within the $5,000–$10,500 range.
Estimated pricing is shown to the right:
Pool Finish/Repair Type | Typical Cost Range |
|---|---|
Plaster | $5000 - $7500 |
Quartz | $6500 - $9500 |
Pebble | $8000-$13000 |
Pool Deck Repairs | $200 - $5000 |
Pool Pump Repair Pool Plumbing Repair Pool Heater Repair Pool Skimmer Repair / Replacement Pool Leak Detection | $200 – $1,500 $350 – $1,000 $200 – $800 $300 – $3,000 $250 – $550 |
The Trusted Pool Repair & Resurfacing Company in Scottsdale, AZ
★★★★★ Pool Resurfacing – McCormick Ranch
“Our pool in McCormick Ranch, Scottsdale had worn plaster, staining, and several rough areas. The pool resurfacing turned out great, and the new finish completely updated our backyard. The crew also repaired a few cracks and replaced damaged waterline tile. We would definitely recommend them for pool resurfacing in Scottsdale, AZ.
Frank C.
Scottsdale, AZ
★★★★★ Pool Repair – North Scottsdale
“We needed pool repair in North Scottsdale after noticing water loss and problems with our pool plumbing. They found the issue, repaired the leaking line, and pressure tested the plumbing afterward. Everything was explained clearly, and our pool has been running perfectly since the repair.”
Martha D.
Scottsdale, AZ
★★★★★ Pebble Pool Resurfacing – DC Ranch
“Our pool at our DC Ranch home was overdue for an update, so we decided to replace the old interior with a pebble-style finish. The difference is incredible. They handled the pool resurfacing, coping repair, and waterline tile replacement, and the finished pool looks completely new. Great choice if you have an older Scottsdale pool that needs resurfacing or remodeling.” DC Ranch is a recognized North Scottsdale service area for resurfacing and remodeling projects.
Steve B.
Scottsdale, AZ
★★★★★ Pool Crack & Equipment Repair – Gainey Ranch
“We called for a pool crack repair at our home near Gainey Ranch in Scottsdale and also had them inspect our aging pool equipment. They repaired the damaged area, fixed a plumbing issue, and helped get the circulation system working properly again. Professional service from beginning to end, and I’d recommend them to anyone looking for swimming pool repair in Scottsdale.”
Stacey M.
Scottsdale, AZ
Swimming Pool Repair and Resurfacing FAQs
We handle equipment repair, leak detection, tile work, plumbing issues, and full resurfacing projects.
Our team also addresses crack repair, pump and motor replacement, and filter system troubleshooting. Whether it's a small fix or a larger structural issue, we assess the problem and provide a straightforward repair plan.
Pool resurfacing in the Scottsdale area typically ranges from $5,000 to $10,500, depending on pool size and material choice.
Pebble finishes tend to cost more than traditional plaster but last longer under Arizona's intense sun. We provide a written estimate after inspecting your pool's condition and size.
Rough or pitted surfaces, visible staining, and flaking plaster are common signs that resurfacing is due.
Scottsdale's heat accelerates surface wear, so pools here often need attention sooner than in cooler climates. If you notice discoloration or your pool loses water faster than usual, we recommend scheduling an inspection.
Replastering addresses surface-level wear, while full resurfacing corrects deeper structural or cosmetic issues.
We evaluate the extent of damage before recommending one approach over the other. In many cases, older pools with cracking or exposed rebar require full resurfacing rather than a simple replaster.
Yes, we repair and replace pumps, filters, heaters, and related equipment.
Arizona's hard water and mineral content can cause equipment to wear down faster than expected. We diagnose the issue first, since a failing pump doesn't always mean it needs full replacement.
We repair cracked, loose, or missing tile and can replace sections that no longer match due to fading or calcium buildup.
Tile damage often signals underlying issues with the pool's structure or water balance. We inspect the surrounding area during tile repairs to catch related problems early.
Common signs of a pool leak include unusually fast water loss, higher water bills, wet areas around the pool deck, air entering the pump system, or difficulty maintaining the proper water level. We provide pool leak detection in Scottsdale, AZ using methods such as dye testing, plumbing pressure testing, and electronic detection to locate leaks in pool shells, skimmers, fittings, and underground plumbing.
Some pool cracks can be repaired individually, depending on their location, depth, and whether they are structural or limited to the plaster or interior finish. We inspect cracks in Scottsdale swimming pools to determine whether pool crack repair, plaster repair, structural repair, or complete pool resurfacing is the appropriate solution.
Yes. We repair damaged Pebble Tec, Pebble Sheen, plaster, and exposed aggregate pool finishes and can recommend complete resurfacing when deterioration is widespread. Scottsdale's intense sun, high temperatures, mineral-rich water, and pool chemistry can contribute to staining, scaling, rough surfaces, and deterioration of older pool finishes.
Our Scottsdale pool plumbing repair services can address leaking pipes, return lines, suction lines, skimmer connections, main drains, fittings, valves, and other components of the pool circulation system. We can also use pressure testing and leak detection techniques to help isolate underground plumbing problems before determining the appropriate repair.
Yes. Scottsdale's extreme summer temperatures and intense UV exposure can contribute to deterioration of pool plaster, Pebble Tec finishes, coping, tile, decking, seals, and pool equipment over time. Regular inspections and timely pool repairs can help prevent smaller problems from developing into more extensive pool resurfacing or remodeling projects.